Equalizer Express HydroBlades

SKU: PWR5154/PWR5155/PWR5189/PWR5188/PWR5193

Equalizer Express HydroBlades Feature

• Small dimples in the flat surface of the blade carry cutting lubricant directly into the urethane with each stroke.
• Cutting is easier.
• Lengthens tool battery life.
• Reduces vibration.
• Made of proprietary stainless steel.
• Can be used with Equalizer Express Blade Handle and Equalizer power tools
• Available in 5 sizes.
• Made in USA

Choose Blade Width x Length

Choose an option1-1/2" x 10" PWR5155 | EHB1451-1/2" x 12" PWR5193 | EHL1463" x 10" PWR5188 | EHB1863" x 12" PWR5189 | EHL1873" x 14" PWR5154 | EHE160Clear

• Choose Blade Width x Length

  • Choose an option 1-1/2″ x 10″ PWR5155 | EHB145 1-1/2″ x 12″ PWR5193 | EHL146 3″ x 10″ PWR5188 | EHB186 3″ x 12″ PWR5189 | EHL187 3″ x 14″ PWR5154 | EHE160

  Reset options

QTY:

Equalizer Express HydroBlades quantity

Add to cart

Add to Wishlist

Add to Wishlist

Description

Equalizer Express HydroBlades™ have small dimples in the surface of the blade to carry lubricant directly into the urethane with each stroke. Cutting is easier, vibration is reduced and the life of your cutting tool’s battery is lengthened.  Made of proprietary stainless steel.  Can be used with Equalizer Express Blade Handle and Equalizer power tools. Available in 5 sizes: Available in 1-1/2″ x 10″, 1-1/2″ x 12″, 3″ x 10″, 3″ x 12″, 3″ x 14″.

POWER CUT OUT TOOLS Safety and Performance Tips

• SHARPEN: Keep blades sharp. NEVER use dull blades! Sharpen only the tapered side of the blade.
• LUBRICATE: Always lubricate the blade and glass surface by spraying on liberal amounts of plain tap water.  Lubricate the sheath with high-heat grease.
• PROPER USE:  The FLAT side of the blade should ALWAYS be against the glass.  Start the tool before penetrating the adhesive.
• LEARN: Read instructions and watch the video!

Choose the right blade for the job (W” x L”)

• NARROW WIDTH (1-1/2″) for removing and saving glass that is not broken.  Narrow width is more flexible and puts less stress on the glass.
• STANDARD WIDTH (3″) for slicing through wide bands of urethane, plunge cutting or angle cutting when glass is already broken.
• STANDARD LENGTH (10″) for most vehicles.
• EXTRA LENGTH (12″ and 14″) for extra reach where the urethane is far below the dash and/or there is a limited amount of vertical space.