Equalizer Express Standard Blades

SKU: SKU: PWR5181/PWR5182/PWR5180/PWR5183/PWR5185

Equalizer Express Blades Feature

• Back by popular demand!
• Flexible material easily cuts through wide urethane beads with less pressure on the glass.
• Use with Equalizer Express Blade Handle and most Equalizer power cut-out tools (see below).
• Available in 5 sizes.
• Equalizer Part Nos. BFE1401, LBE1403, BFE1400, LBE1402, RLE1404

Choose Blade Width x Length

Choose an option1-1/2" x 10" PWR5181 | BFE14011-1/2" x 12" PWR5182 | LBE14033" x 10" PWR5180 | BFE14003" x 12" PWR5183 | LBE14023" x 14" PWR5185 | RLE1404Clear

• Choose Blade Width x Length

  • Choose an option 1-1/2″ x 10″ PWR5181 | BFE1401 1-1/2″ x 12″ PWR5182 | LBE1403 3″ x 10″ PWR5180 | BFE1400 3″ x 12″ PWR5183 | LBE1402 3″ x 14″ PWR5185 | RLE1404

  Reset options

QTY:

Equalizer Express Standard Blades quantity

Add to cart

Add to Wishlist

Add to Wishlist

Description

Back by popular demand!  The Equalizer Express™ Blades are designed to cut through wide beads of urethane using a flexible material that puts less stress on the glass. Can be used with Equalizer Express Blade Handle and most Equalizer power cut out tools (see compatible tool list below). Available in 5 sizes: 1-1/2″ x 10″, 1-1/2″ x 12″, 3″ x 10″, 3″ x 12″ and 3″ x 14″.  Made of stainless steel in the USA.

For optimal auto glass removal pair Express Blades with:

• Express™ Blade Handle (PWR5196)
• BlackHawk™  (PWR2029)
• Ambush™ (PWR2070)
• StingRay™ (PWR2058)
• 360°™(PWR2098)
• Black-Ops™ PWR2069
• Express™ Air PWR2059 | SP1416

POWER CUT OUT TOOLS Safety and Performance Tips

Misuse can lead to personal injury, tool and/or vehicle damage.

• SHARPEN: Keep blades sharp. NEVER use dull blades! Sharpen only the tapered side of the blade.
• LUBRICATE: Always lubricate the blade and glass surface by spraying on liberal amounts of plain tap water.  Lubricate the sheath with high-heat grease.
• PROPER USE:  The FLAT side of the blade should ALWAYS be against the glass.  Start the tool before penetrating the adhesive.
• LEARN: Read instructions and watch the DVD and instructional videos!

CHOOSE THE RIGHT BLADE FOR THE RIGHT JOB (W” x L”):

• NARROW WIDTH (1-1/2″) for removing and saving glass that is not broken.  Narrow width is more flexible and puts less stress on the glass.
• STANDARD WIDTH (3″) for slicing through wide bands of urethane, plunge cutting or angle cutting when glass is already broken.
• STANDARD LENGTH (10″) for most vehicles.
• EXTRA LENGTH (12″ and 14″) for extra reach where the urethane is far below the dash and/or there is a limited amount of vertical space.