Equalizer Express HydroBlades

Equalizer Express HydroBlades™ are an industry favorite for windshield removal. Lubricated with plain old tap water, they make short work of urethane. Choose the right blade (W" x L"):

	NARROW WIDTH (1-1/2")	STANDARD WIDTH (3")
STANDARD LENGTH (10")	For most vehicles. For removing and saving glass that is not broken.	For most vehicles. Slices through wide bands of urethane, plunge cutting or angle cutting when glass is already broken.
EXTRA LENGTH (12" and 14")	Extra reach when urethane is far below dash or there's limited vertical space. For removing and saving glass that is not broken.	Extra reach when urethane is far below dash or there's limited vertical space. Slices through wide bands of urethane, plunge cutting or angle cutting when glass is already broken.

Features:

• Small dimples in the flat surface of the blade carry cutting lubricant directly into the urethane with each stroke
• Cutting is easier
• Lengthens tool and battery life
• Reduces vibration
• Made of stainless steel
• Can be used with PWR5196 Equalizer Express Blade Handle and most power cutout tools (see below)
• Made in the USA

POWER CUT OUT TOOLS Safety and Performance Tips

---

• SHARPEN: Keep blades sharp. NEVER use dull blades! Sharpen only the tapered side of the blade.
• LUBRICATE: Always lubricate the blade and glass surface by spraying on liberal amounts of plain tap water.  Lubricate the sheath with high-heat grease.
• PROPER USE:  The FLAT side of the blade should ALWAYS be against the glass.  Start the tool before penetrating the adhesive.
• LEARN: Read instructions and watch the video!